Production & prototype printing
Drop in a file.Get the real price.
We read your STL in the browser, measure the part, and price it against the machines actually sitting on our floor. No sales call to find out what it costs.
- Quote turnaroundInstant
- Typical lead time5–7 business days
- Typical tolerance±0.2 mm
- Largest single part256 × 256 × 256 mm
- Filaments in stock5
- Minimum order$25
Instant quote
$25 minimum order STL · OBJ · 3MF · STEPSTL and OBJ are measured and priced instantly. STEP and 3MF we open and quote by hand.
Choose a fileWhat we run
One process, run properly
We print FDM and nothing else. That focus is the point — every setting on our machines is tuned for filament, and we can tell you honestly when your part needs something we don't do.
FDM · fused filament
The machines
Enclosed, hardened-nozzle printers running 0.4 mm standard. Abrasive filaments get their own machines so nothing cross-contaminates.
- Build volume256 × 256 × 256 mm
- Layer height0.12 – 0.28 mm
- Tolerance±0.2 mm or ±0.3%
- Min wall0.8 mm
- Nozzle0.4 mm hardened
Good fit
What FDM does well
Parts that have a job to do. Layer bonding is strong along the plate, so we orient every part for the load you tell us about.
- Brackets & mountsYes
- EnclosuresYes
- Jigs & fixturesYes
- Replacement partsYes
- Short batch runsYes
Poor fit
When to call instead
We'd rather tell you up front than sell you a part that fails. If your job lands here, we'll say so and point you somewhere useful.
- Features under 0.8 mmNo
- Watertight vesselsAsk us
- Tolerance under ±0.2 mmNo
- Above 90 °C serviceNo
- Runs over 250 partsAsk us
Stock materials
Pick by what the part has to survive
All five are on the shelf today and priced in the quote tool above. Ask us about color matching.
| Filament | Tensile | Max service temp | Best for | From |
|---|
Order to doorstep
How a part gets made
Four steps, in this order, every time. You hear from a human at step two.
STEP 01
Upload and price
Drop the file above and set material, layer height and quantity. The price updates as you go.
STEP 02
We check the geometry
An engineer opens your file, checks wall thickness and manifold errors, and emails you before anything prints.
STEP 03
Print and finish
Your part goes on a machine that day. Supports come off, surfaces get whatever finish you chose.
STEP 04
Inspect and ship
Critical dimensions are measured and photographed. Tracking lands in your inbox the moment it leaves.
Before you ask
Common questions
How accurate is the instant price?
For STL and OBJ files it's the price we'll invoice, as long as the part prints as modeled. We read the actual mesh volume and bounding box in your browser, so the estimate isn't based on a guess about size. If an engineer finds a problem — unsupported overhangs, walls under the minimum, a non-manifold mesh — we email you with the fix and the revised number before printing.
What happens to my files?
Your file is measured in your browser and only leaves your machine when you send the quote. We don't share, resell or reprint customer geometry, and we delete files 90 days after a job ships unless you ask us to keep them for reorders. Mutual NDAs are signed the same day you send one.
Can you print something I don't have a model for?
Yes. Send photos, a sketch with dimensions, or the broken part itself and our design team will model it. Modeling runs $85/hour with a one-hour minimum, quoted before we start.
Do you do production runs, not just prototypes?
Regularly. We run multi-part plates for batches, and we'll hold your files and filament on a standing schedule so reorders ship in two days. Batches over 250 get quoted by hand and often come in under the calculator price.
What if the part comes out wrong?
If a part misses the ±0.2 mm tolerance or arrives damaged, we reprint it at no charge and pay the shipping. Tell us within 14 days of delivery.
Do you print in more than one color?
Yes, up to four colors in a single part on one machine — no gluing, no painting. Multicolor isn't priced by the instant quote tool, because the cost depends on how the colors are arranged rather than just the size of the part. Tell us about the job on the color printing page and we'll quote it by hand, usually the same day.
Which file format should I send?
STL at fine or custom resolution is fine for most jobs. Send STEP if you need tight tolerances or want us to adjust the model — it keeps the real geometry instead of a triangle approximation. Include a PDF drawing whenever a dimension is critical.
Talk to a person
Not sure which filament to pick?
Describe the part and what it has to do — heat, sunlight, load, chemicals. We'll tell you the cheapest filament that will actually hold up, and say so when FDM is the wrong answer entirely.
- Emailinfo@3dtoprint.com